Spare Parts
860001
NEM 652 Fixed wired harness
With the use of these 8-pin 652 sockets harnesses, enables you to fit dcc decoder to non dcc locomotive
allows non dcc trains to be converted to dcc without having to wire dcc decoder straight into the train, the socket is fitted with a adhesive pad to attach to the train in case a fault on the dcc decoder arises its easy to remove dcc decoder and replace within minutes
860002
DCC 8 Pin NEM652 Socket with Solder Tabs
With the use of these 8 pin dcc decoder socket, enables you to fit dcc decoder to non-dcc locomotive/car easy
Size About: 20mm*18mm*7.5mm
860003
NEM 652 Trailing wired harness
With the use of these 8-pin 652 sockets harnesses, enables you to fit dcc decoder to non dcc locomotive allows non-dcc train to be converted to dcc without having to wire dcc decoder straight into the train, the socket is fitted with a adhesive pad to attach to the train in case a fault on the dcc decoder arises its easy to remove dcc decoder and replace within minutes
860004
8PIN TO 21 PIN ADAPTOR
Making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a locomotive which has a 21MTC connector installed. Unlike other adapters, LaisDcc 21 pin adapters are already pre-wired with function 3 / Aux 1 / green wire connections and also have an easy to solder to connection point for function 4 / aux 2 / purple wire should it be needed.
860005
NEM651 6PIN TO 6Wire Converter Board
This board is with a NEM651 6Pin. And with 6 solder pad can solder with 6 wires. It’s use for LaisDcc customers to convert a NEM651 wire decoders 860012 to a NEM651 6Pin decoders similar like 860013.
860008
21PIN MTC Adapter Board 21PIN to 21 Wires Board
21PIN MTC Adapter Board 21PIN to 21 Wires Board
870009
KungFu Stayin Alive Kits Pro 1
The LaisDcc KungFu Stayin Alive Kits are used to supply power to decoders during times of power interruption due to dirty track or problematic track work It will power an HO Scale locomotive for approximately 6 to 20 seconds (depending on the locomotive and the efficiency of the motor). It includes a blue and a black wire with which to attach it to a decoder. The blue wire is the positive/DC+, the black wire is the GND. You can use it with sound decoders and mobile decoders.
Dimensions: 26mm x 11.4mm x 8.8mm
870007
KungFu Stayin Alive Kits Lite 1
This stayin alive kits lite is new designed stayin alive kits. With smaller size but still enough to keep your HO and N scale locomotives running across dirty and faulty trackwork at 2 – 6 seconds
Dimensions: 25mm x 8.9mm x 6.2mm
871007
KungFu Stayin Alive Kits Lite 2
With the same performance of 870007. But with different sharp and size, so as to fit different space the customers have.
Dimensions: 8.9mm x 8.9mm x 13.5mm
871009
KungFu Stayin Alive Kits Pro 2
With the same performance of 870009. But with different sharp and size, so as to fit different space the customers have.
Dimensions: 14mm x 14mm x 12mm
872007
KungFu Stayin Alive Kits Lite 3
With the same performance of 870007. But with different sharp and size, so as to fit different space the customers have.
Dimensions: 8.9mm x 8.9mm x 13.5mm
860024
4-Point Junction Boards
These 4-Point Junction Boards have 4 solder pads joined together by 4 circuit traces. Use these boards to connect wires, resistors, bulbs, LED’s, etc. without having to solder wires directly together. Feel free to cut the traces to isolate solder points! This is a pack of 28 junction boards, you can cut it into boards with any combination as you need.
Dimensions of each board: 8.38mm x 7.11mm x 0.8mm
860025
8PCS Pre Wired WARM White SMD 3528 Led Lamp Light Set 12V 20cm Wire DD00WM
- The wire about 20cm(L), the PCB board about 1CM*1CM.
- Forward voltage:12V~18V(1000 Ohm resistor in series)
- AC or DC Compatible.
- Forward current (typ): 20mA
- Light Color:Warm White
860026
Pre-Wired 0805 SMD LED
Perfect for small models and really tight places! Soldering SMDs is very difficult, but these pre-wired units take all the work out of it for the modeler. This kind of soldering is very extensive and difficult to perform, but is offering maximum flexibility when applying the LED and is ensuring place-saving usage. For optimal insulation with minimal outside diameter and at the same time “water-like” softness, translucent silver stranded micro litz wire with only 0.28 mm in diameter is used. The insulation is made from a highly heat-resistant material with a high Teflon®-fraction. That´s why during soldering there is almost no longitudinal shrinkage. The wire length is about 200 mm. For easy recognizable connecting, the Cathode is black and the Anode is red.
- Size: SMD Led 0805(2.0mmx1.2mm)
- The wire is about 20cm(L).
- Forward voltage:2.8V~3.4V,
- AC or DC Compatible.
- Forward current (typ/max): 15mA/20mA.
- Viewing angle:120°.
- Emitting color: Warm White
860027
DCC LED Resistor Board
PCBA Size: 17mm*8mm
Designed to save time, space and to help maintain a cleaner DCC installation. Intended for use with DCC Mobile, Sound and Lighting decoders requiring a hardwired installation with an output of 12V on the function common wire. Designed for use with most LED’s. Test your LEDs with a 12V power supply or a 9V battery with a 1K ohm 1/8 watt resistor wired inline on one of the leads prior to installation1. It contains eight 1K Ohm 1/8W SMD resistors for up to 8 lighting functions including headlight and reverse light. This compact board measures only 17mmX 8mm and is perfect for narrow hood diesel locomotives! We are not responsible for damage caused to the LED’s or the board if the incorrect LED is used with this board. Please test your LED’s prior to using this board to confirm the 1K Ohm resistor provides enough or too much resistance. Installation is a breeze… Simply solder the blue wire from the decoder to the ” Blue Wire (+)” pad on the board and solder the wire to anode of each LED from the solder pads marked for each function (FL/RL/1/2/3/4/5/6) and then solder the appropriate wire from the decoder to the negative lead of the LED corresponding to that function!
860028
2-Pin Micro Connector
Wires Color: Black and Blue
Wires Length: About 120mm
This is a simple, two pin, 1 mm pitch, micro quick plug wired connector. When connected together it is 2.5mm wide by 1.5 tall by 3mm long, and it has 120mm long wires on both ends. This mini, quick plug connecter is ideal for hardwire situations where you may have to remove or disconnect certain components from time to time. This quick plug connector is also ideal for “Break Away” applications where connections to need to be broken easily for safety or convenience. Each side of the connector has a blue and a black (for polarity matching), 32 gauge, very flexible decoder wire soldered to it and insulated with heat shrink tubing.
The Pitch (distance from center to center of the pins) is 1 mm.
860029(Discontinued)
4-Pin Micro Connector
Wires Color: Black, Gray, Orange, Red
Wires Length: About 120mm
This is a simple, 4 pin, 1 mm pitch, micro quick plug wired connector. When connected together it is 2.5mm wide by 1.5 tall by 3mm long, and it has 120mm long wires on both ends. This mini, quick plug connecter is ideal for hardwire situations where you may have to remove or disconnect certain components from time to time. This quick plug connector is also ideal for “Break Away” applications where connections to need to be broken easily for safety or convenience. Each side of the connector has a blue and a black (for polarity matching), 32 gauge, very flexible decoder wire soldered to it and insulated with heat shrink tubing.
The Pitch (distance from center to center of the pins) is 1 mm.
860030
NEM652 8PIN HO Scale Train Model DCC Base Board for Bachmann & Athearn Train
You can add this board to upgrade the analog train to Dcc digitization
860032
Next18 NEM662 Male Socket Adapter Board
This board help you convert a decoder into Next18 interface.
Size:15*9.6mm
860033
DCC Decoder Tester
Use to test the dcc decoders before install into the locomotive
Interface:
- 21MTC
- NEM652
- NEM651
- PLUX22/PUX16/PLUX12/PLUX8
- NEXT18
- MOTOR
- SPEAKER
860035
21PIN/21MTC Male to Pad Adaptor
Use this board you can convert a decoder with wires to a 21MTC 21Pin decoder.
860036 V2
Power Distribution Board for DC and AC Voltage
This distribution is the ideal solution for the model train to supply all lighting. There are 2 connectors for the input of voltage and 2 x 12 connectors for the outputs on the distributor. And we have two hole for connect two or more distributions in series if one PCS is not enough for you. 2 holes for mounting with wide spacers.
- Dimensions: Approx. 90mm(L) x 18mm(W) x 14mm(H).
- Maximum voltage: 30V AC / DC AC and DC voltage. Total supply
- Maximum current: 10A (supply at terminal 2-pole).
- Current carrying capacity per connection: 10A(max).
- With Status LED and Resistor
860036 V3
Power Distribution Board for DC and AC Voltage
This distribution is the ideal solution for the model train to supply all lighting. There are 2 connectors for the input of voltage and 2 x 13 connectors for the outputs on the distributor. And we have two hole for connect two or more distributions in series if one PCS is not enough for you. 2 holes for mounting with wide spacers.
- Dimensions: Approx. 90mm(L) x 18mm(W) x 14mm(H).
- Maximum voltage: 30V AC / DC AC and DC voltage. Total supply
- Maximum current: 10A (supply at terminal 2-pole).
- Current carrying capacity per connection: 10A(max).
- With Two Extra Output at another end for extension for another Board Set
860037
Power Distribution Board 2 Inputs 8X2 Outputs
This distribution is the ideal solution for the model train to supply all lighting. There are 9 connectors for Left Rail and 9 connectors for Right Rail. You can use any of them as input and the other 8 point as output of Left Rail or Right Rail. 4 holes for mounting with wide spacers.
- Dimensions:Approx. 66mm(L) x 18mm(W) x 17mm(H).
- Maximum voltage: 30V AC / DC AC and DC voltage.
- Total supply maximum current: 10A
- Current carrying capacity per connection: 10A(max).
860038
Power Distributors Board 9 Connectors for DC and AC Voltage
This distribution is the ideal solution for the model train to supply all lighting. There are 2 connectors for the input of voltage and 2 x 9 connectors for the outputs on the distributor. And we have two hole for connect two or more distributions in series if one PCS is not enough for you. 2 holes for mounting with wide spacers.
- Dimensions: Approx. 65mm(L) x 9mm(W) x 17mm(H).
- Maximum voltage: 30V AC / DC AC and DC voltage.
- Total supply maximum current: 10A
- Current carrying capacity per connection: 10A(max).
860039
LED Flasher
Size: 3.3CM*2.5CM Operating Voltage: 3V-12V, DC Compatible.
For the LED flasher, there are many possible applications, especially for the kids, who love flashing light, here is some possible uses. Railroad crossing signal for model railroads.
- Saftey blinkers for bicycles, etc
- Fun stuff for Halloween, like making those plastic Jack-o-lanterns blink(Try using ultraviolet LEDS here)
- Christmax decorations
- Blinkers to locate items in the dark.
860041
8PCS Pre Wired Bright White SMD 3528 Led Lamp Light Set 12V 20cm Wire DD00WM
- The wire about 20cm(L), the PCB board about 1CM*1CM.
- Forward voltage:12V~18V(1000 Ohm resistor in series)
- AC or DC Compatible.
- Forward current (typ): 20mA
- Light Color:Bright White
860042
21MTC Adapter Board No.2
- 21MTC Adapter Board No.2 with power amplifier MOS and Wires
- Power AUX3 and AUX4 = 1A
860044
6 Pin Decoder Blanking Plug
6 Pin Decoder Blanking Plug for model railway trains (Straight) 860044 for NEM651 DCC ready locomotive
- Size: 1CM*0.8CM
860045
Sapphire 21MTC/21PIN To 8PIN/NEM652 Harness adaptor
Sapphire 21MTC/21PIN To 8PIN/NEM652 Harness adaptor Wires Length: About 100mm-120mm Function: Use for the customers who want to use a 21MTC sound or Non-sound decoder for a build-in NEM652 8Pin Locomotive
860046
21PIN/21MTC To 8PIN/NEM652 Harness adaptor with Speaker Wires
21PIN/21MTC To 8PIN/NEM652 Harness adaptor with Speaker Wires for Dcc model train Railway/LaisDcc Brand One side is 21MTC adaptor board with 21 Pad Another side is NEM652 Male Plug Wires Length: About 100mm-120mm Function: Use for the customers who want to use a 21MTC sound or Non-sound decoder for a build-in NEM652 8Pin Locomotive
860047
NEM652 Male Plug with Wire Harness
NEM652 Male stock with 8 NMRA Color wires at about 100mm in length
860050
DC/DC Voltage Regulator
Input Range: 4.5V-28V
Output Range: 0.8V-20V
Max Output Current: 3A
Size: 22*17*4mm
860051
DBX-9000 Wiring Kit for Tender
The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal style DCC decoders. It is designed to simplify the wiring connection between a steam locomotive and its tender.
The DBX-9000 provides a simple quick-disconnect to make it easier to separate the tender from the locomotive for painting, storage or service.
Nine solder pads correspond to the nine wires of the harness to be used for motor, lights, track pickups, and/or cam. The center hole accommodates a 3mm screw.
The circuit board measures 1.75CM x 2.3CM L and the 9-wire harness is 6″ (15CM) long
860052
Aux 3-4 Logic Level Function Amplifier Board
The Aux 3-4 Logic Level Function Amplifier Board offers a clean way to convert the logic outputs provided on DCC decoders made by LaisDcc, ESU, Zimo and others into useable, function outputs. You can use it for Aux5 & Aux 6 also if you need.
860053
NEM652 TO 5PIN JST Board
Use this board you can solder all wires to this board and plug in an NEM652 decoders directly to this board to build inside a train.
With the 5PIN JST plug, you can move the whole sets of lights to another loco.
860054
Miniature Relay
Relay 1 A miniature relay, 16 volts Great to control loads that exceed decoder function outputs such as smoke units.
860055
Plux22 Base Board for Sound Decoder
Digitalization your Locomotive from analog/DC with sound and like. Just plug in a plux22 mobile decoder or sound decoder on this base board.
860056
Plux22 Base Board for Sound Decoder
Digitalization your Locomotive from analog/DC with sound and like. Just plug in a plux22 mobile decoder or sound decoder on this base board.
860057
NEM651 Base Board
This board only help you upgrade your train to a DC Analog Train. It’s not able to use for DCC.
860064
Capacitor Discharge Unit – CDU – 4x 4700uF
Provides a high current pulse to “snap” points across positively from the capacitors Limits subsequent points current to prevent coil burn out Prevents voltage drop to other parts of the installation during points action. Operates on AC or DC supplies. Uses a high quality industrial double sided PCB
860065
ABC DCC brake (Asymmetric DCC Generator)
Automatic Brake Controller will generate asymmetric DCC to activate the braking feature on suitably equipped DCC decoders. ABC is fitted to Lenz silver/gold decoders, Zimo and many others. The DCC waveform is slightly modified by reducing the voltage on one side of the waveform by around 1.6 Volts. This activates the ABC feature on the DCC decoder (if present) and causes the locomotive to gently stop. When the circuit is deactivated the locomotive will gently accelerate. In its most simple form an ON/OFF switch is connected across the SWITCH terminals to activate the circuit.
PS: LaisDcc Decoder do not support ABC Function.
860066
Multi-Scale Track Tester
This track tester works on OO, HO and N Gauge track and enables you to quickly test track for DCC or DC power as well as also helping you to locate faults at track joints, points etc. To use, simply place it across your track and the multi-coloured LED will either display Orange for DCC power, or Red and Green for DC power with the colour indicating the positive or negative. The polarity (or train direction) of the rails is shown on the product.
860067
Arc Welding Simulator
This welding simulator is very realistic. It uses white and blue LED’s to give a bright pulsating light similar to that of an electric arc welder. The circuit can be hidden inside a building on a model railway layout or diorama to provide activity and realism. The realistic effect is achieved by random length of flashes and a random length between Flashes. Small size Approx 27mm x 22mm x 10mm (L x W x H) .Operates from 6 to 20v Smooth DC or 9v Battery.Reverse Polarity Protection. Low power consumption. Blue and White LED’s for realistic effect.
860069
21PIN Decoder Blanking Plate
21PIN Decoder Blanking Plate for 21-pin decoder sockets
860071
Adapter board 18-pin Next18 socket on PluX16
Adapter board 18-pin Next18 socket on PluX16
860072
21MTC 21PIN Adaptor Board
Adaptor Board Convert Base Board Digitization Analog Model Railway Train to DCC Support Use for Sound Decoders
860075
51998 Adapter board Next18 to 21MTC, for certain Liliput engines
51998 Adapter board Next18 to 21MTC, for certain Liliput engines
Approximately Dimensions:18mm*20mm
860086
NEM651 Color 6Pin Female Socket with Wiring Harness
- Pitch: 1.27mm
- Applications: This harnesses is a female NEM651 socket with wires. It’s easy to convert NEM651/NMRA 6 pin decoders to a decoders with wires.
- Colour coded wiring to match NMRA standards.
- Wire Length: 100mm
860087
6Pin/8Pin Adaptor
NEM651/6PIN Female scoket to NEM652/8Pin adaptor convertor Wiring Harness
860088
1/0.65mm Shrink Tubes
1/0.65mm Shrink Tubes for Decoders Installation with 70mm in length each
860089
0.6/0.4mm Shrink Tubes
0.6/0.4mm Shrink Tubes for Decoders Installation with 70mm in length each
86009X
10 Color Decoder Wire
10 Color LaisDcc Multistrand Ultra Fine Ultra Flexible Decoder Wire with 0.51mm Outside Diameter
5m decoder wires with 0.51mm Outside Diameter, 10 Color
- 860090/Black
- 860091/Red
- 860092/White
- 860093/Grey
- 860094/Blue
- 860095/Green
- 860096/Yellow
- 860097/Orange
- 860098/Violet
- 860099/Brown
Other railway Spare Parts
Made base On Your Request
If you need some model train spare parts that not in our current range, kindly let us know. Maybe we will add this to our products range.
Manufacturing Services
Made base On Your Design
If you have your own design or concepts, we can manufacturing it base on your design documents.
OEM Services
Made with your brand
If you want the products with your own brand. We can made it for you base on our MOQ.